Jumping & Compressor KDR-AP2

[Jumping & Compressor]
This all-in-one jump starter and electric air pump maintenance machine allows you to easily start your engine when the battery dies and adjust the air pressure at home or on a tour. It can also be used to adjust tire pressure in cars and bicycles. The physical button allows you to adjust tire pressure while wearing gloves. It automatically inflates to the specified pressure. The booster cable features a longer cable and small-diameter alligator clips optimized for motorcycles, eliminating the worry of a sudden dead battery.

[All that was previously impossible can now be accomplished with this one device]
・Maintaining the correct air pressure prevents uneven tire wear and improves fuel efficiency. ・No need to replace the battery early, so you can go on long tours with peace of mind. ・Can also charge electronic devices. ・Useful for leisure activities such as inflating balls and swim rings. ・Refills air after repairing a puncture.
*Notes* 1. When in use, a sound of approximately 85db is generated. Depending on the environment, this may reverberate and be loud. 2. This product becomes very hot as it compresses and releases air. This does not affect its use. Also, please avoid prolonged continuous use and be careful not to touch parts that are prone to become hot, such as the hose. 3. If the hose is not properly attached or there is a foreign object inside the hose, it may cause a malfunction. If you experience any malfunctions, problems, or discomfort, you may be able to resolve the issue by resetting the product by pressing and holding the +- button on the unit for more than 5 seconds.

[Product Specifications]
■Size: Length 170mm, width 106mm, thickness 51mm, weight: 755g, ■Operating temperature: -10 to 45°C, ■Battery capacity: 8000mAh ■Discharge pressure: 2 to 160PSI ■Discharge volume: 26 to 28L/min ■Air pressure units: PSI, BAR, KPA, Kg/cm2 ■Air pressure limit: 999KPA ■Continuous operating time: Within 10 minutes, ■Booster cable: Positive side approximately 30cm, negative side approximately 24cm ■Starting voltage: 16.8V to 12V ■Starting current: 400A (Gasoline engine displacement: up to 3.0L, diesel engine displacement up to 3.0L) ■Maximum starting current: 1000A ■Charging time 3 to 4 hours
■ Input Type C: 5V2A/9V2A/12V2A/15V2A/20V3A
Output Type C: 5V2A/9V2A/12V2A/15V2A/20V3A
■ Output type A: 5V2A/9V2A

[Product contents]
Jumping & Compressor unit, 30cm air hose (American valve), booster cable, Presta valve adapter, British valve adapter, ball needle, swim ring nozzle, charging cable, storage bag, instruction manual

[Manufacturer's warranty]
■ Manufacturer's warranty period: 1 year (expires on the same day as purchase)
At Kaedia, we offer after-sales support to ensure customer satisfaction. We have nationally certified staff who can provide expert advice on product and motorcycle installation, so we can provide the necessary support. If a defect is diagnosed as being due to a product defect, we will review the issue based on our manufacturer's warranty policy and provide a free repair or replacement under the manufacturer's warranty. For commercial use, the manufacturer's warranty period will be reduced by half (e.g., if the manufacturer's warranty period is one year, it will be reduced to six months, which expires on the same day as the purchase date). For details, please see the manufacturer's warranty policy on our official website. We also provide support after installation and use. As a Japanese manufacturer, we offer a hospitable service. Please feel free to contact us.