モバイルジェットタービン ストームフォース KDR-BL4
- Regular price
-
¥19,880 - Regular price
-
- Sale price
-
¥19,880
【モバイルジェットタービン ストームフォース】
洗車のあとの水滴を、強い風で飛ばす。Kaedearの充電式ブロワー「MOBILE JET TURBINE STORM FORCE(KDR-BL4)」です。
■サイズ:長さ245.5mm×横幅142.1mm×厚み72mm
■重さ:836g(500mlのペットボトル約1.7本分)
■主な用途:洗車後の車体やバイクシートの水飛ばし/キーボード・PCの清掃/車内やエンジンまわりのメンテナンス
【時速252km相当の風|洗車後の水飛ばしに】
最大風速70m/s(時速252km相当)、最大風力800gの風で、洗車のあとにタオルが届きにくいボルトまわりやエンジンフィンの谷間、車体やシートに残った水を飛ばします。風の強さは強・中・弱の3モードから選べ、最も強いモード3(強)の連続稼働は約7分です。
※時速は最大風速(m/s)×3.6で換算した値です。
※最大風速・最大風力は、満充電の最も強いモード3(強)での値です。
【この大きさには、理由があります|大きなファンと大容量バッテリー】
ブラシレスモーターの最大回転数は80,000rpm。大排気量のエンジンが低い回転でも力強いのと同じ考え方で、大きなファンで風量を確保します。22.2V・2500mAh(3.7Vのセル6本を直列、約55.5Wh)のバッテリーを搭載し、最大消費電力はモード3(強)で470Wです。
【強・中・弱の3モード|用途に合わせて選べます】
モード1(弱):最大風速28m/s(時速約101km)・連続稼働 約60分・騒音 70dB未満(1m)
モード2(中):最大風速40m/s(時速約144km)・連続稼働 約30分・騒音 75dB未満(1m)
モード3(強):最大風速70m/s(時速約252km)・連続稼働 約7分・騒音 90dB未満(1m)
※連続稼働は目安です。充電状況や使用年数によっても異なり、保護機能が働くと途中で止まることがあります。
モード1(弱)は細かい掃除に、モード3(強)は洗車後の水飛ばしなど力が要る作業に向いています。モード3(強)は音が大きいため、使用する時間帯と場所にご配慮ください。充電はType-C(30W)で、充電時間は2時間以上です。
【電源とモードの切り替え|かんたんな操作】
電源は、電源・モード切替ボタンの2秒長押しでオン/オフします。モードは、同じボタンを短く押すたびに、モード3(強)→モード2(中)→モード1(弱)の順に切り替わり、モード1(弱)の次は、モード3(強)に戻ります。送風は、スイッチを押して行います。
【画面とLED|モードと電池残量が見えます】
画面には、風のマーク、モードの数字(3・2・1)、バッテリーのマスが表示されます。バッテリー残量は4マスで、1マスが25%です。充電中は、残量に合わせてバッテリーのマスが点滅し、満充電になると点滅が止まります。作業の途中でも、モードと電池の残りを確認できます。
LEDは、照明ボタン(☀マーク)で操作します。長押しでオン/オフ、短押しで、低・中・高・点滅の4パターンに切り替わります。
※商品画像の画面表示と光は、実機の動作をもとにしたイメージです。実際の明るさや照らす範囲とは異なります。
【5つの保護機能|安心してお使いいただくために】
過電流保護(20A電流制限)、過熱保護(温度センサーで監視)、モーターロック保護、バッテリー温度保護、3分間操作がないと自動で電源オフになる機能を備えています。保護機能が働くと、使用中でも送風が止まることがあります。
【3種類のノズル|広い面にも、すき間にも】
ノズルは丸型・平型・長型の3種類です。広い面にもすき間にも、用途に合わせて使い分けられます。暗い場所での作業には、LEDが便利です。
【ご使用前にお知らせしたいこと】
・本体は防水ではありません。本体や吸気口に水がかからないようにご使用ください。
・取扱説明書はダウンロードでご提供しています。ご使用前に、注意事項と手順をご確認ください。
【セット内容】
①本体、②ノズル(丸型)、③ノズル(平型)、④ノズル(長型)、⑤充電ケーブル
取扱説明書:環境負荷の軽減を目指した脱炭素化への取り組みとして、紙媒体での同封を控えております。取扱説明書はダウンロードでのご提供のみとなります。
【商品詳細】
■本体材質:ABS
■モーター:ブラシレスモーター
■最大風速:70m/s
■最大風力:800g
■最大回転数:80,000rpm
■風速調整:3モード(強・中・弱)
■操作:電源は2秒長押し/モード切替は短押し(3→2→1の順に循環)/送風はスイッチ(モード3(強)は押している間だけ、モード2(中)・モード1(弱)は1回押すと開始・もう1回押すと停止)
■表示:モードの数字(3・2・1)・バッテリー残量(4マス、1マスが25%)
■モード別性能:モード1(弱)=25,000rpm・最大風速28m/s・連続稼働約60分/モード2(中)=35,000rpm・40m/s・約30分/モード3(強)=80,000rpm・70m/s・約7分
■消費電力:モード1(弱)=45W/モード2(中)=95W/モード3(強)=470W
■騒音(1m):モード1(弱)=70dB未満/モード2(中)=75dB未満/モード3(強)=90dB未満
■バッテリー容量:22.2V・2500mAh(3.7Vのセル6本を直列)
■作動電圧:22.2V
■充電方式:Type-C(30W)
■定格入力:DC 20V 1.5A
■充電時間:2時間以上
■保護機能:過電流保護(20A電流制限)、過熱保護(温度センサー)、モーターロック保護、バッテリー温度保護、自動電源オフ(3分間操作がない場合)
■LED:1個搭載(低・中・高・点滅)/照明ボタン(☀マーク)で操作(長押しでオン/オフ、短押しで切り替え)
■使用環境:温度−20〜60℃/湿度80%未満
■サイズ:長さ245.5mm×横幅142.1mm×厚み72mm
■重さ:836g
■ノズル:丸型・平型・長型の3種類
■利用シーン:洗車後の車体の水飛ばし/雨上がりのバイクシートの水滴飛ばし/キーボード・PCの清掃/車内メンテナンス/エンジンルームの清掃/家具やインテリアのホコリ除去/バーベキューの火起こし
■ブランド:Kaedear(カエディア)
*仕様及び外観は改良・改善の為、予告なく変更する場合があります。
【ご使用上のご注意】
※ご使用前に、取扱説明書で注意事項と手順をご確認ください。
※分解・改造はしないでください。
※可燃物の近くでは使用しないでください。バーベキューの火起こしに使う場合は、炭への送風に限り、火の粉や引火に十分ご注意ください。
※吸気口・吹き出し口をふさがないでください。
※異音や異常な振動を感じた場合は、使用を中止してください。
※強い衝撃を与えないでください。
【メーカー保証】
■メーカー保証期間:1年(ご購入日と同日が期限)
製品不良に起因する不具合と診断される場合は、弊社のメーカー保証規定に基づき審議させて頂き、メーカー保証による無償での修理、交換を行わせて頂きます。付属品の紛失や、転倒・落下による破損は、有料にて部品提供させて頂きます。業務用に使用される際は、メーカー保証期間を半分の期間とさせて頂きます(例:メーカー保証期間が1年の場合、6ヶ月となり、ご購入日の月に6ヶ月を加算した同日が期限)。詳細は弊社のメーカー保証規定に準じます。ご使用後でも、対応させて頂きます。日本メーカーとして、おもてなしの心で対応致します。先ずはお気軽にご相談下さい。
■About shipping
Shipping fee <br/>Normal products: Free shipping nationwide (within Japan only)
Aftermarket parts: 200 yen nationwide (free shipping for orders over 1000 yen)
Products from other manufacturers: 500 yen nationwide (free shipping for orders over 5,000 yen)
Product delivery time <br/>We will ship your product immediately after confirming your order.
Normally, it takes about 2 business days for the product to be shipped. If the shipment is delayed due to bad weather, the convenience of the delivery company, or for any other reason, we will notify you by email.
We do not ship on Saturdays, Sundays, or holidays.
Product delivery method <br/>After shipping arrangements are made by our company or Rakuten Logistics, to which we have outsourced part of the shipping operations, the product will be delivered by Japan Post or other shipping companies.
Handling of items exceeded the storage period <br/>Items returned after the storage period has expired will be stored for one month until we receive contact from the customer.
We will refrain from contacting you.
As soon as we receive your contact, we will charge you the reshipment fee (one-way shipping fee) and reship the item.
■About manufacturer's warranty
All our products are subject to the following:
The product is being used and installed correctly in accordance with its intended purpose.
Please improve the installation and handling methods according to the instructions given by our after-sales service staff.
The vehicle is being used in a manner prescribed by the Road Traffic Act.
We cannot guarantee the product if it is not installed or handled correctly. Please note that we are only responsible if the product is found to be defective, and we are not responsible for any damage other than the product. In the unlikely event that a defect in our product causes an accident or damages the user's property or body, and compensation for damages to the customer is legally recognized, we will handle it under the product liability insurance that we have subscribed to.
What is a product defect?
A product defect is a malfunction which can be restored to the original specifications of the product by repair or replacement. However, cases where the product specifications (specs, functions) do not meet the user's requirements are not considered product defects.
What is an initial defect?
If a malfunction occurs due to defects caused by individual differences in materials or manufacturing during normal use within 6 months of purchase, and the symptoms can be clearly confirmed in advance with images or videos, it may be considered a manufacturing defect, and we will first mail a replacement product free of charge. After receiving the product, you will use the return envelope enclosed and return it to us for inspection. If the product is not found to be defective upon inspection, we will replace it for a fee. Even if it is within 6 months, depending on the product and the state of damage, it may not be considered a manufacturing defect. We will handle it as a manufacturer's warranty, not as a manufacturing defect.
What is a manufacturer's warranty?
If a breakdown or other problem occurs during normal use due to defects caused by individual differences in materials or manufacturing, etc., we will repair or replace the product free of charge within the warranty period set for each product (including shipping costs for repair or replacement). The purpose is to protect customers from damage caused by damage to products that would not normally be damaged due to individual differences in the product. In addition, the purpose is to understand the product-specific defects and characteristics that are discovered through actual use, and use this information to improve the quality of products that we plan in the future.
Warranty period
The warranty period is from the date of purchase to the date stated in the product information. If the warranty period has expired, repairs or replacements will be available for a fee. For products that cannot be repaired or replaced, please purchase a new product.
Proof of warranty period
Proof of purchase date is required for each product warranty.
- For online purchases, please enter the product order number (personal sales on Yahoo! Auctions, Mercari, etc. are not eligible)
- For purchases made in store, please provide a receipt or invoice
The above proof of purchase is required for product warranty. If you cannot prove the purchase date, the product will not be covered by the warranty. Thank you for your understanding.
Regarding defect inspection
The cost of returning the product for inspection will be refunded if it is covered by the product warranty. If there is no problem with the product, you will be charged for the round-trip shipping fee. Please be aware of this in advance. We strive to narrow down the cause of the defect as much as possible before returning the product so that the shipping fee is not borne by the customer. After-sales service staff cannot visually grasp the actual situation, and the problem assumed by the after-sales service staff may differ from the actual problem based on verbal or written explanations alone. Please be sure to attach photos and videos, and perform troubleshooting as much as possible before the after-sales service staff provides guidance. In principle, the product will be judged after it is received and inspected. Please note that we cannot judge the product defect based only on email or official LINE.
Return Method
Japan Post / Yamato Transport / Sagawa Express (Please use the smallest possible packaging.)
If your after-sales service representative gives you instructions on how to return the product, please use the specified method to return it.
<Information to be filled in> Please be sure to fill in the following information before returning it.
・Order number: Please write your order number or enclose a receipt or invoice. ・Return details: Product warranty (defect details)
・Inquiries: Contact method when making inquiries ・Shipping address: Postal code, address, name, phone number
*If you do not fill in this information, your item will be returned as unknown.
<Return address>
〒226-0025
Advance 5-1F-B, 849-6 Tokaichiba-cho, Midori-ku, Yokohama, Kanagawa Prefecture
Kaedear Inc.
080-6583-4783
Regarding cash on delivery
If you return the item cash on delivery, we will refuse to accept the item unless you make a reservation for cash on delivery. We will only accept the item if you have made a reservation in advance.
<Common examples of electrical equipment>
When you report a malfunction in an electrical device, we will send it back for inspection, and there may be no problem with the product itself.
The power supply may be the cause, such as poor contact of crimps , high resistance due to terminal corrosion , loose fuse holders , short circuits due to wiring rubbing , and concentrated wiring due to the addition of electrical equipment . In the unlikely event that there is no problem with the product, we ask that you cover the round-trip shipping costs (including postage and return envelope fees). Thank you for your understanding and cooperation.
Regarding returns at your discretion
*If you decide to return the item, we will not be able to offer a refund or accept any other returns.
*If you are returning the item to the store as instructed by customer support, we will record the return request and then confirm the return/receipt.
*If we are unable to confirm your detailed information, we will respond in accordance with the storage period stipulated in the warranty regulations.
Warranty details
If a defect occurs within the warranty period, we will repair or replace it free of charge.
*Even if the product is replaced, the product warranty will be for the product model you purchased. Product changes such as model changes and color changes are not allowed under the product warranty. If the product cannot be repaired or replaced due to discontinuation of the product, we will provide a full refund.
Warranty Coverage
If the product is inspected and found to be defective.
Usage covered by the warranty
The correct installation, use, inspection and maintenance procedures provided by our staff are required. Please be sure to follow the instructions below. If you do not follow the instructions, we may refuse to provide warranty repairs. Thank you for your understanding.
1. You are using the Services in accordance with the contents of the product information on this OFFICIAL website, in catalogs, etc.
2. You are using the product in accordance with the instructions in the product manual.
3. You are using the service in accordance with the instructions of the after-sales service staff.
Items that cannot be guaranteed
The following items cannot be guaranteed:
- Defects caused by aging and wear during use. (The specifications are based on the product concept, and defects occur when used in other applications.)
- Minor sensory symptoms that do not affect the quality or functionality of the product (abnormal noise, vibration, operating speed, smoothness of operation).
- Product defects caused by natural disasters such as earthquakes, typhoons, floods, accidents, and fires.
- Product defects caused by soot, chemicals, bird droppings, salt damage, etc.
- Product defects caused by processing or modification of the product (excluding product defects not caused by processing or modification)
- Product defects that the user can discover and fix, such as loose bolts and nuts, as well as defects that are left unattended and cannot be fixed.
- Product defects caused by failure to follow the usage instructions covered by the warranty.
- Product defects that occur when the product is used under severe conditions that exceed normal usage, such as the usage environment, usage conditions, frequency of use, or number of uses.
- Damage caused by input force exceeding that expected under normal use.
- Problems with product characteristics. (Problems with product performance that cannot be improved by repair or replacement)
The following items cannot be covered:
- Costs for parts, repairs, maintenance, etc. other than the Product damaged due to the defect.
- Costs such as labor costs incurred when returning products for inspection.
(Including loss or damage that renders the product unusable while the product is being inspected) - Costs for loss, damage, etc., incurred when the vehicle cannot be used.
(Including communication costs, replacement costs, replacement vehicle costs, transportation costs, business damages, etc.)
There is a storage limit for your items.
If it is discovered that the cause of the defect is not the product itself, but the power supply, installation method, or handling method, we will charge you the round-trip shipping fee that we would normally cover. If you do not pay, we will store the product for one month, and if the period is exceeded, we will refund at least 10% of the purchase price and dispose of the product.
*If you are experiencing problems with a product malfunction or damage, even if the problem is not covered by the product warranty, please feel free to contact our after-sales service staff first.
シェア








Our passion for manufacturing
-
Physical store
Installation services and direct conversations with customers help us develop, improve and refine our products.
-
After-sales service
If you have any questions about installation, we have staff who hold national maintenance qualifications and can handle your specialized knowledge.
-
Aftermarket Parts
We can provide repair parts and aftermarket parts. You can rest assured that there will be no loss or damage to any part.
-
Manufacturer's warranty
In the unlikely event that a product defect occurs, we will provide a product warranty in accordance with our warranty terms. For details, please see the warranty terms on our official website.

