Electric Heated Gloves, Electric Thermostreet KDR-MX-GL7WH

[Heater provides comfortable support for winter riding] Three temperature settings are possible: MAX 40°C (5-6 hours), MAX 50°C (2-2.5 hours), and MAX 60°C (1-1.5 hours). Equipped with a rapid heat function that heats up instantly when the power is turned on, it provides comfortable warmth. It evenly heats the back of the hand, which cannot be warmed by a grip heater, and warms it up to the fingertips. The maximum usage time is about 6 hours, but the temperature and duration may vary depending on the outside temperature, charging status, and usage environment. For safe use, pay attention to temperature changes and adjust as necessary. *You can ride more comfortably by using a separate grip heater to warm your palms.

[Waterproof and heat-retaining material and smartphone touch compatible] HIPORA waterproof material prevents rain from entering while efficiently expelling internal moisture. 3M Thinsulate padding provides excellent heat retention, making it comfortable even in harsh winters. Compatible with all-finger smartphone touch screens, allowing you to operate your smartphone without removing the gloves. *Please note: ① Touch-enabled fabric will wear out. ② Depending on the type of screen or film, it may become insensitive or not respond. ③ Use of bleach, fabric softener, and dryer may cause deterioration. ④ If dirt is attached, it will not respond, so please clean it regularly. ⑤ It is water-repellent, so it repels moisture and reduces dirt. However, it needs to be dried thoroughly after washing. The following maintenance method is recommended: Hand wash with mild detergent. Air dry is recommended (avoid using a dryer).

[Operability and protection performance] Equipped with knuckle protectors and palm sliders to absorb and reduce impacts when falling. By putting the sleeves of the jacket on your wrist and tightening the belt, you can prevent wind from entering while riding, and support winter riding more comfortably. Unlike general winter gloves, the design is flexible and reduces the burden on your grip when you grip it. It is comfortable to wear even for long periods of time without getting tired. In addition, the goatskin used in the right places works with the protector to further improve protection in the event of a fall. It is thin and lightweight, yet has high heat retention. In addition, the reflective print improves visibility at night and supports safe riding. The anti-slip processing with accent lines improves operability, and the sporty stitch design gives a sophisticated impression to the appearance. *Note: ① The size design makes it difficult for the fingertips to be left over, improving the operability of smartphones. ② Even during long-distance riding, there is less strain on the finger crotch, and it is less likely to hurt. ③ When new, the grip material may feel slippery. ④ Choose one size up for a comfortable fit. If you plan to wear inner gloves, please choose one size larger.

[Product Details] ■Size: [S size] Hand length: 18.0 cm, middle finger length: 7.5 cm, palm width: 18.1 cm, wrist length: 11.1 cm, wrist width: 32.3 cm [M size] Hand length: 18.8 cm, middle finger length: 7.8 cm, palm width: 19 cm, wrist length: 11.3 cm, wrist width: 32.5 cm [L size] Hand length: 19.5 cm, middle finger length: 8.1 cm, palm width: 20 cm, wrist length: 11.5 cm, wrist width: 32.7 cm [XL size] Hand length: 20.2 cm, middle finger length: 8.4 cm, palm width: 21 cm, wrist length: 11.7 cm, wrist width: 32.9 cm [XXL size] Hand length: 20.9 cm, middle finger length: 8.7 cm, palm width: 22 cm, Wrist length: 11.9 cm, Wrist width: 33.1 cm ■Materials: 3M Thinsulate, HIPORA, CH-Fit, [Outer shell] 78% nylon, 9% polyurethane, 7% spandex, 6% sheepskin, [Lining] 100% polyester, [Protector] 100% thermoplastic polyurethane, ■Contents: Glove body, battery, charging cable, ■Battery: Part number KDR-MX-GL7422, 7.4V/2200mA, PSE mark, *Scheduled to be sold separately in 2025. (Compatible products are already on sale.) ■Product name: Electric Thermo Street ■Brand: Kaedear Yokohama Moto Gears

[Manufacturer's warranty] ■ Manufacturer's warranty period: 6 months (expires on the same day as the purchase date) We will respond if fraying occurs during normal use of consumable items. Tearing due to rubbing does not constitute a product defect. In the unlikely event that the defect is diagnosed as being due to a product defect, we will review the matter based on our manufacturer's warranty regulations and provide free repairs or replacements under the manufacturer's warranty. If the product is used for commercial purposes, the manufacturer's warranty period will be halved (for example, if the manufacturer's warranty period is 1 year, it will be 6 months, and the expiration date will be the same day as the purchase date plus 6 months). For details, please see the manufacturer's warranty regulations on the official website. We will provide support after installation and after use. As a Japanese manufacturer, we will provide support with a spirit of hospitality. Please feel free to contact us.

[How-to video]