Jumping & Compressor KDR-AP2

[Jumping & Compressor]
This all-in-one maintenance machine combines a jump starter and electric air pump, allowing you to easily start your engine when the battery dies or adjust tire pressure at home or on the road. It can be used not only for motorcycles but also for adjusting car tire pressure and inflating bicycles. The physical buttons allow you to adjust the air pressure while wearing gloves during operation. It automatically inflates to the specified pressure. The booster cables are optimized for motorcycles, featuring a longer length and small-diameter alligator clips, so you never have to fear a sudden dead battery again.

[Everything you couldn't do before, all in one unit]
・Maintain proper tire pressure to prevent uneven wear and improve fuel efficiency.・No need for premature battery replacement, providing peace of mind for long-distance touring.・Charges electronic devices.・Useful for leisure activities like inflating balls and pool floats.・Inflating tires after puncture repairs.
※Notes※ ① The unit produces approximately 85dB of sound during use. It may feel loud depending on the environment due to echoes. ② This product compresses and discharges air, causing it to become hot. This is normal. Please avoid continuous long-term use, and be careful not to touch areas that easily get hot, such as the hose. ③ If the hose is not attached properly or if there is foreign matter inside the hose, it may cause malfunctions. If you experience malfunctions, defects, or feel something is wrong, pressing and holding the +/- buttons on the unit for 5 seconds or more may reset and resolve the issue.

[Product Specifications]
■ Size: 170mm long, 106mm wide, 51mm thick, Weight: 755g, ■ Operating Temperature: -10 to 45°C, ■ Battery Capacity: 8000mAh, ■ Discharge Pressure: 2-160 PSI, ■ Discharge Rate: 26-28L/min, ■ Air Pressure Units: PSI, BAR, KPA, Kg/cm², ■ Maximum Air Pressure: 999KPA, ■ Continuous Run Time: Within 10 minutes, ■ Booster Cables: Positive side approx. 30cm, negative side approx. 24cm, ■ Starting Voltage: 16.8V-12V, ■ Starting Current: 400A (Gasoline engine displacement: up to 3.0L, Diesel engine displacement: up to 3.0L), ■ Peak Starting Current: 1000A, ■ Charging Time: 3-4h
■ Input Type-C: 5V2A/9V2A/12V2A/15V2A/20V3A
■ Output Type-C: 5V2A/9V2A/12V2A/15V2A/20V3A
■ Output Type-A: 5V2A/9V2A

[Product Contents]
Jumping & Compressor unit, air hose 30cm (Schrader valve), booster cables, Presta valve adapter, Dunlop valve adapter, ball needle, float nozzle, charging cable, storage bag, user manual

[Manufacturer Warranty]
■ Manufacturer Warranty Period: 1 year (expires on the same day as the date of purchase)
At Kaedear, we provide post-purchase support to ensure customer satisfaction. If you have any questions about the product or need advice on installation for your motorcycle, we have staff with national maintenance certifications to provide accurate responses based on expert knowledge. In the unlikely event that a failure is diagnosed as being caused by a product defect, we will deliberate based on our manufacturer warranty policy and provide free repair or replacement under the manufacturer's warranty. For commercial use, the manufacturer's warranty period will be halved (e.g., if the manufacturer's warranty is 1 year, it becomes 6 months, expiring on the same day 6 months after the month of purchase). For details, please see the manufacturer's warranty policy on our official website. We are happy to assist even after installation and use. As a Japanese manufacturer, we will respond with a spirit of hospitality. Please feel free to consult with us first.