KAWASAKI Z400
KDR-H3-2 [Ultra-thin mirror clamp bar]
Installation of KDR-M22A [Shuriken] .
Please come to our store before you go home.
I was allowed to work from the evening onwards.
The Z400 has a tough look and looks great!
The Z400 will have the same body as the Ninja 400 series.
It's a good working bike.
This time, after consulting with the customer, we decided to use a mirror mount !
Kaedear's mirror mount can be installed even if the mirror bolt is short.
It has a thin design, which means the height of the mirror is less likely to change from left to right.
We also carry types with a thick design that is resistant to vibration, so you can choose the type that best suits your needs.
Power supply for KDR-M22A [Shuriken]
Route the wiring from the rear of the Z400.
When you open it, it will look like the image below.
Branches off from the wiring for the optional USB power supply.
The rear is a standard design for Kawasaki's current models and looks great!
A valuable partner for our customers. We performed the work carefully!
Finally, we took a photo with the customer.
Please come! We look forward to seeing you again.
