For Suzuki Address V125S KDR-M22A [Shuriken] and KIJIMA grip heater Please make an appointment for installation Thank you for visiting our store.The Address V125 is extremely popular among local bike enthusiasts. It is easy to use, and a high percentage of customers who visit our store use the Address 125.
The throttle pipe needs to be modified, so it will need to be removed from the handlebars and the surface adjusted.
Combine the throttle pipe and grip and return to the base.
Demand for grip heaters is increasing in preparation for autumn and winter touring! Kaedear Grip exchange type KDR-392A1 [Grip heater] and Simple wrapping type KDR-GH1 [Roll heater] etc. We have it available.
Because of the steering wheel cover, the customer wanted to install the remote control separately, so we recommended KIJIMA's GH08, which has a separate remote control.
When branching power from around the fuse, there is an upstream and downstream.
By removing the negative probe and placing the positive probe on each of the fuse legs, you can determine which is the power source before it passes through the fuse.
If the circuit branches after the fuse, the fuse capacity will need to be increased, so it is important to branch as close to that point as possible and allocate fuses finely to each system.
By wiring in this way, you can prevent the fuse from cutting off the electrical supply to a system that is not malfunctioning.Finally, check the difference between the battery voltage with all electrical equipment running at full capacity and the voltage applied to the grip heater and smartphone holder.
Since the voltage drops by 0.5A from 14.5V to 14.0V, we conclude that the device is good and end the operation.
Many people have found that when they measure the voltage with the wiring disconnected, there is no problem with the electricity.
The most important thing is how many volts the voltage can be maintained under load.
If this cannot be maintained, the voltage drop can be suppressed by pulling the earth to the battery negative, by making the wiring thicker or shorter, or by increasing the number of wiring, or by using a 4-pole relay to run a wiring directly from the battery positive.It's difficult to operate a smartphone when your hands are cold, but the heated grips make it comfortable.
We look forward to seeing you again.
